	about us for dealers news articles contact us

Products

Touch screens Touch monitors Controllers Open Frame Printers Bill validators GSM modems

BEWARE OF IMITATIONS!

$\'Компания$

main page / controllers / 6001u controller

Controllers

6001U controller

enlarge image

Reliability and functionality are among main characteristics of this device. It is proved by the data of MTBF greater than 200,000 hours per MIL-HDBK-217-F2 using the parts stress calculation method for ground benign environment with an ambient temperature of 40°С.

Technical data

Electrical parameters

+12 VDC, nominal (+11 VDC - +13 VDC)

100 мА at +12В. Average power dissipation – 1.2 W

Power supply must be capable of sourcing minimum 200 мА

Total noise requirements must be less than 100 mV (p-p) for frequency below 1 MHz, and less than 50 mV (p-p) for frequencies above 1 MHz

Interface

USB 1,1

Touch resolution

4096х4096, size independent

Conversion time

approximately 16 ms per coordinate set (including transmitting time)

Reliability

MTBF greater than 200,000 hours per MIL-HDBK-217-F2 using the parts stress calculation method for ground benign environment with an ambient temperature of 40°С

Environmental temperature

operating: 0°С to 65°С

storage: -25°С to 85°С

Humidity

operating: 10% to 90% RH, non-condensing

storage: 10% to 90% RH, non-condensing

ESD

per EN 6100-4-2: contact discharge 4KV, air discharge 8KV

Flammability

The printed circuit board substrate is rated 94V0. All plastic components, such as headers and connectors, are also rated 94V0.

Physical characteristics

Multi-layer surface-mount design with internal ground plane for EMI suppression

Dimensions

Total width: 62 mm, including connectors

Total length: 85 mm

Total height: 10.8 mm

Download driver:

for Windows 2K/XP/Vista/

for Win9x,WinMe

Attention! Buy only genuine General Touch products from Plast Game company and our dealers. Beware of imitations!